Skip to main content
Sketch an initial wall layout

Straw-bale house floor plan configurator

Arrange structural and partition walls on a grid, check every dimension and prepare a clear sketch for a module and pricing discussion.

Working plan for a modular straw-bale house

Start with the sample rectangle or clear the plan and add walls by selecting two points on the grid.

Dimensions are indicative. The sketch does not replace documentation prepared and checked by qualified designers.

Drag a wall to move it. Drag a square endpoint to change its length or direction. Arrow keys move the selected wall by one grid step.

The plan is ready for editing.

Floor structure above this level

This structure is above the selected level and supports the floor of the level above. The ground-floor slab is not included here.

Working geometry only. The rim/band joist closes joist ends and transfers loads at the wall line; it is not automatically a transfer girder for an offset upper wall.

Top plates and rim boards

The module frames already include their upper rails. This top plate is an additional continuous member above the modules. Timber and optional installation are priced separately. Connectors require a separate estimate.

The perimeter follows the bearing wall axes, with no overlap at corners. Layers are stacked vertically. Lengths are provisional; member divisions and connections must follow the structural design.

Floor joists

Opening frame connectors

Proposed intermediate supports

A support line is a planning reference. A separate button adds a modular wall or girder beam to the plan and estimate. Dimensions, connections and the load path to foundations require a structural design.

Floor geometry review

    Partition walls are not floor supports. Intersections refer to the working grid and are not instructions to cut joists. Bearings, stair headers and openings around chimneys require design.

    Floor, ceiling and roof materials

    Floor, ceiling and roof materials

    Choose the materials to include. Roof area follows its slopes and overhang. Installation is quoted separately.

    For an attic, roof shape and pitch follow the attic settings.

    Installations

    Workspace and scale

    The workspace can be enlarged for a hall, farm building or large shop. Structural feasibility still requires verification by a qualified engineer.

    Plan summary

    Levels
    0
    Walls
    0
    Windows and doors
    0
    Net wall area
    0 m²
    Structural modules
    0
    Partition modules
    0
    Opening modules
    0
    Floor, ceiling and roof materials

    Indicative materials

    The estimate covers all levels. Selecting a plan view does not limit the estimate to that level.

    Module cost
    –
    Materials outside the modules
    –
    Project being priced
    Selected scope total, excluding transport
    –

    The total excludes the purchase and installation of windows and doors. The estimate accounts for wall openings and the modules required around them.

    Material items exclude labour on site. Priced work, if selected, is listed separately.

    The selected floor and roof materials are included when priced. Foundations, windows and doors, installations, stairs, chimneys, transport and site installation require separate quotations.

    Module prices include manufacturing labour. Site wall assembly requires a separate contractor quotation.

    We will prepare the final quote after reviewing your project.

    Keep the sketch

    Wall elevations and module layout

    Each card shows one wall on the current level. Module codes match the production layout included in the JSON export.

    • Structural modules
    • Partition modules
    • Opening module
    • Straw-insulated BL box lintel

    Add a wall on this level to generate its elevation.

    This is an indicative geometric division. Connections, lintels and module build-ups require verification by the designer and structural engineer.

    From an idea to a readable sketch

    The configurator lets you arrange a top view without installing design software. Every wall has a visible dimension, endpoint coordinates, a working thickness and a category. You can move it with a pointer, touch, the keyboard or numeric fields.

    Small marks show an indicative division into short modules. The module width, grid snapping and wall thicknesses remain editable. This makes the result useful for an initial layout discussion without defining the final construction method.

    Files you can keep

    The drawing stays in the current browser tab. You can download an SVG for viewing or printing and a JSON file that preserves the geometry for later work. A separate button transfers a concise summary to the editable contact form.

    Tool limitations

    This is a concept sketch, not an architectural, structural or construction design. It does not verify loads, foundations, the roof, services, openings, regulations, fire safety or energy performance. Initial wall thicknesses and module width are working settings and must be confirmed for the selected technology, design and site.

    Send the sketch for an initial discussion

    Add the plan summary, describe the intended build and provide your contact details. The sketch will help us identify the information still required.

    Enquiry source Straw-bale floor plan configurator

    Fields marked with * are required.

    Use the configurator button to insert a wall summary here, then add the location, schedule and expected scope.